Kamasa-TOOLS K 9901, Быстрый старт

Страница: 2 / 8

2
This tool is designed for tightening and loosening of threaded fasteners
within the range as specified by the manufacturer. It should only be used
in conjunction with suitable impact type 1/2” square driver nut running
sockets. Only use sockets which are of the impact type.
SAFETY AND PRECAUTION
1 Always use impact resistant eye protection when operating a pneumatic tool.
2 Only use impact sockets together with a pneumatic impact wrench.
3 Always be aware that hearing protection is recommended at sound levels above
85 dBA, 2003/10/EG.
4 Never use a bigger tool then necessary for the job, a more powerful tool tends to vibrate
more.
5 Vibration, repetitive motions or uncomfortable positions may be harmful to your hands
or arms. Stop using any tool if discomfort, tingling feeling or pain occurs, seek medical
advice before resuming use.
6 Keep unqualified persons, children, etc. away from the tool.
7 Never use oxygen and combustible gas as an air supply for the tool which many be
ignited by spark and cause fire or explosion.
8 This power tool is not intended for use in potentially explosive atmospheres and is not
insulated against coming into contact with electric power.
9 Never use gasoline or other flammable liquids to clean the tool.
10 Do not expose air tools to rain. Do not use air tools in damp or wet locations.
11 When not in use, keep tools in a dry place, either locked up or in a high place,
out of the reach of children.
12 Only qualified and trained operators should install, adjust or use power tools.