CONSTRUCTION OF THE LUBRICATOR
Lubricator hose and grease gun
PROBLEMS AND SOLUTIONS DURING USE
1.
When the gun does not feed grease, check the hose and gun
for patency. If everything is fine,
check that the grease is not too thick.
2.
When the grease leaves the grease gun, check the latches
and screws securing the closing lid.
3.
If the grease leaks spontaneously from the gun, check that
the gun terminals are not damaged.
4.
Non-operating pump. For the pump to work properly,
the following conditions must be met:
- adequate pressure
- clean grease with appropriate density
- the right amount of grease
- device tightness
DIAGRAM OF DIMENSION OF THE LUBRICATOR