Adjustable green laser
(not applicable to red & blue laser)
The brightness of the green laser is adjustable. To increase or decrease the brightness, turn the Green Laser Power
knob on the back of the unit clockwise or anticlockwise.
Tripod mount
The unit can be mounted on the supplied tripod mount. Ensure that the unit is not plugged in, then screw the tripod to
the underside of the chassis. Spread the tripod’s legs and set in position.
Universal mounting bracket
If you wish to permanently position the unit, screw the universal mounting bracket to a surface using rawlplugs where
necessary. Attach the unit to the bracket with the screw mount. You can adjust the position of the laser by loosening
the ball and socket joints and tightening them when you are happy with the direction the unit is pointing in. Make sure
that the laser is never pointing in anyone’s eyes.
The unit is a class 3R laser. Please adhere to the following precautions:
Do not stare into the laser especially of a distance of less than 0.25m / 10".
Please mount the laser so that audiences cannot stare into the beams at these distances.
Caution
– use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
Safety warning stickers
The yellow and black safety stickers that are attached to the laser unit are warnings that need to be adhered to.
The above sticker is placed next the laser aperture on the front of the unit. Never look directly into the unit’s aperture.
The above triangular sticker is placed on the front of the unit to indicate the presence of a laser.
The above sticker is placed on the top/front of the unit and indicates that the unit is a Class 3R laser product.
