Building a serial DMX chain
You can connect multiple units in a DMX chain. Connect the DMX output of the first unit in the chain to the DMX input of the next
unit. Always connect one output with the input of the next unit until all units are connected. Then set the starting address for all
units using the above dip switch table. If the address of the first unit is set as 1, the second unit should be set to 6 (as the unit has 5
channels); the third unit is set at 11 and so on.
Using a DMX controller
If you are using a DMX controller with the chain, connect the DMX output of the controller directly into the DMX input of the first unit
in the DMX chain.
DMX512 connection / connection between units
All DMX cables must be wired correctly, with suitable 2 core screened cable. The signal lines must be separate and no cables
should be bridges. Please check this if you are trying to use a microphone cable as these are often balanced leads and will not
work for DMX purposes.
Master/Slave operation
Press the
FUNC
button to enter MODE OPTION
Till to LED display shows
SLA
Press the
ENTER
button to confirm the setting.
The laser is working in “SLAVE MODE”. Connect the MASTER and the SLAVE
Laser together with a DMX cable, the SLAVE lasers will know do what exactly MASTER laser does.
Key lock
The unit can be „locked‟ to stop the laser being turned on without the owner‟s permission. Using the supplied key, lock the unit and
remove the key. The unit will no longer operate whether it is connected to the mains or not.
In some countries this is a legal requirement for all laser units.
Wireless remote control
Select wireless remote control mode by pressing the
FUNC
button to enter MODE OPTION and press till to LED display shows
ReN.
The three buttons on the unit control laser output, Mode and Program select.
Button A:
Off, Red, Off, Green, OFF, RED and Green.
Button B:
Sound or Auto on Currently Program.
Button C:
Program select: first one Random Programs of all effects, then step and hold each one and each time you press step to
the next effect
Specifications
Rated voltage:
AC100v-240V / 50Hz-60Hz
Power consumption:
11w
Laser power:
Red – 100mW / 650nm
Green – 50mW / 532nm
Blue – 120mW / 450nm
Laser source:
Red – Diode
Green – DPSS
Blue – Diode
DMX channels:
6 Channels
Control modes:
Auto / Sound-to-Light / DMX512 / Master/Slave / Remote control
Audio input:
Built-in mic for Sound-to-Light mode
Connection:
XLR input & output
Cooling system:
Forced fan
Fuse:
20mm, 1A Slow Blow
Laser classification
Class 3B
Dimensions (WxHxD)
160 x 180 x 260mm
Weight:
1.8Kg
