KAM Star Cluster 150, Инструкция по эксплуатации

Страница: 6 / 8

MASTER/SLAVE MODE

Press FUNC to enter the MODE selection

Use the up/down buttons to select SLA for Slave mode

Press ENTER to confirm the setting
Now the laser is working in SLAVE MODE. Connect the MASTER laser with several SLAVE lasers using a DMX cable. The SLAVE
lasers will produce exactly the same laser show as MASTER laser.
SOUND ACTIVATED MODE – SENSITIVITY SETTING

Press FUNC till to you see S 6

Use the UP/DOWN buttons to set microphone sensitivity.
S0 is no sound, from S1 to S9, the sensitivity level increases.

Press ENTER to confirm and save the setting.
DMX MODE

Press FUNC to enter the MODE selection

The LED panel will show 001 for DMX mode

Press ENTER to confirm the setting
Now the laser is working in DMX mode.
Use the up/down buttons to select the DMX address.
Note: In DMX MODE, once the DMX cable is connected to the laser and DMX controller, the DMX LED in front panel of laser will
be ON.