KAM KMD20, Инструкция по эксплуатации

Страница: 6 / 10

5
(48) HEADPHONE VOLUME CONTROL
Using the control, you can control the output level of headphone
and monitor the signals reverb from speaker.
(49) 2-TRACK OUTPUT
(50) MAIN MIX
(51) ALT3-4 OUTPUT PFL
(52) PFL/SOLO
When you push the SOLO/PFL button,
the SOLO/PFL control led will light up.
(53) OUTPUT LEVEL DISPLAY AND WORKING INDICATOR
You can choose the master channel and monitor
the output level from the chosen bus channel.
(54) +48V PHANTOM POWER
(55) POWER INDICATOR
(56)(57) UP AND DOW BUTTONS
You can choose the desired preset
(58) ENTER BUTTON
It activates the selected preset.
(33)DIGITAL EFFECTS PROCESSOR
99 Effects (details attached)
01 – 08 Reverb Hall
09 – 14 Reverb Room
15 – 20 Reverb Plate
21 – 25 Ambient
26 – 31 Gated Reverb
32 – 37 Reverse Reverb
38 – 45 Echo & Room/Hall
46 – 50 Voice Doubler
51 – 58 Single Delay
59 – 69 Echo 50% F.B.
70 – 78 Chorus
79 – 87 Flanger
88 – 93 Tremolo
94 – 99 Wah Wah
(34) SEVEN-BAND GRAPHIC EQ
It can adjust input sensitivity from-10dB to +10dB at
the following frequencies: 60Hz, 160Hz, 410Hz,
1.1KHz, 2.3KHz, 6.2KHz and 15.6KHz.
(35) EQ IN
When pushing the switch, it can release the output
signal from EQ. The switch is off, then the signal is
not from EQ.
(36) AUX SENDS GAIN CONTROL
You can have a f15dB available from these
outputs
(37) FX SENDS GAIN CONTROL
You can have a f15dB available from them
(38) AUX PFL
(39) FX PFL
(40) AUX OUTPUT CONTROL
Adjusting the fader, you can get different output
level from AUX
(41) FX OUTPUT CONTROL,
You can adjust the output level of aux.
(42) ALT3-4 OUTPUT LEVEL CONTROL
You can control the ALT3-4 signals separately.
(43)(44) L. R MASTER OUTPUT CONTROL
You can control the L. R signal by adjusting the two
fades.
(45) 2-TRACK INPUT
It is primarily for auditioning mix playback from tape.
(46) ALT3-4 OUTPUT PF
(47) ALT3-4 BUS L