Safety instructions
Please read the following notes carefully because they include important safety information regarding this product.
1. Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning.
2. Do not install and operate the device in rain or extreme heat, moisture or dusty environments.
3. This device is for indoor use only and in a dry environment.
4. If the device has been exposed to drastic temperature fluctuations, do not switch the unit on immediately but wait until it reaches
room temperature.
5. Do not shake the device and avoid brute force when installing or operating.
6. Do not use the device during thunderstorms. Disconnect the unit from the mains.
7. Do not use solvents or aggressive detergent to clean the device. Use a soft, clean cloth.
8. Do not modify the device or the connected power cord.
9. In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs
carried out by unskilled people can lead to damage or malfunction. Please contact your Authorised Kam Retailer. Always use the
same type of spare parts.
10. Never connect the device to a dimmer pack.
11. Make sure the power cord is never crimped or damaged.
12. Never disconnect the power cord by pulling or tugging on the cord.
13. Avoid direct eye exposure to the LED light source while it is on.
14. Never drink the haze/smoke fluid.
15.
IMPORTANT – the smoke aperture on the unit can get VERY HOT. Never touch this area whilst the unit is in operation
and always leave the unit to cool down before touching the area.
1. Safety eyelet
8. Carry handle
2. LED On/Off button
9. Timer remote interval adjust knob
3. Manual Fog button
10. Timer remote duration adjust knob
4. Fan speed regulator (see below) 11. Timer remote output level adjust knob
5. Controller connection
12. Timer remote manual overide button / machine ready LED indicator
6. Power On/Off button
13. Timer remote continous output button / machine power LED indicator
7. IEC mains input
14. Timer remote On/Off button / timer active LED indicator