KAM KCD550, Инструкция по эксплуатации

Страница: 7 / 8

27. MT
When this function is activated, the key of the song will be locked even though the pitch fader is adjusted.
28. POWER ON LIGHT
On front of unit (not shown).
29. FRONT DISC SLOT
On front of unit (not shown). Insert CD disc into this slot. Press the Eject button to release the disc from the unit.
Rear panel functions and operations
1. LINE OUT (RCA jacks)
The analogue audio from the CD player is output from these jacks. Connect to the line input of your mixer.
2. DIGITAL OUT
The digital audio from the CD player is output from this jack. Connect to the line input of the D/A amplifier.
3. REMOTE
This connector is used for connecting to FADERSTART wire remote control unit.
4. RELAY CONNECTOR
This connector is used for connecting to another CD player to allow Relay function to work.
5. POWER (power switch)
Press the power switch to turn the unit on, and the LED indicator will light up. Switch the POWER off by pressing
the POWER switch again.
6. AC (power)
Connect to an AC wall outlet with the proper AC voltage.
Display panel functions and operations
1. Total track
– shows the number of tracks on the inserted CD. During folder selection, it shows the total
folders on the CD.
2. > - the unit is in play.
3. || - the unit is paused
4. Cue – this indicates a cue has been memorized..
5. CD – lights when switching the play source to CD mode.
6. USB – lights when switching the play source to USB mode.
7. PC – no function
8. Cue – lights up when a memorized point is input.
9. Continue – when this light is on, the playback continues without interruption.
10. Time mode (elapsed) – shows the time as it is taking place.
11. Time mode (total) – shows how much time is left on the full CD.
12. Time mode (remain) – shows how much time is left on a particular track.
13. Time bar – show the time length depending on the setting of the “TIME” mode.
14. Track – shows the track number that is playing.
15. Minutes – shows the minute’s elapsed or remaining depending on time mode setting.
16. Seconds – shows the seconds elapsed or remaining depending on time mode setting.