19. TITLE
a. Press this button to show FILE, TITLE, ALBUM and ARTIST. It supports MP3 format only.
b. Hold it and turn TRACK to select a playlist format (XML/ M3U/ WPL). Release this button to enter into the
selected format. Then choose the playlist files to start the playback.
20. TIME
CD mode
- press this button to switch time display between Single Elapsed Time, Single Remain Time and Total
Remain Time.
MP3 mode
- press this button to switch time display between Single Elapsed Time and Single Remain TIME.
Sleep
- hold this button and use the TRACK button to select the time for sleep mode. It can switch between 15, 30
and 60 minutes.
21. CONT./SGL
Press this button to switch between Continue mode and Single AUTO CUE mode.
Continue mode - Playing from the first track continually to the last track. When skipping to the next track, it will
continue the playback.
If you skip under this mode, the Main Cue is still set at the first track or the new Main Cue which has just been
memorized. It won’t renew to the new Cue of each track by pressing SKIP.
Single Auto Cue Mode – When going on to the next track or skipping to the next track, it pauses at the main cue of
the next track automatically.
Remote Control (Hold CONT and press SKIP to select the type of switch in the mixer for FADERTSTART
wire remote control)
Select Lock, Tack and Cue/Play by using this switch mode.
Lock
: when the mixer’s fader is moved to the end belonging to the channel of the player every time, the playback
will start and then pause instantly.
TACT:
When the mixer’s crossfader is moved to the end belonging to the channel of the player for the first time,
the playback will start.
When the mixer’s crossfader is moved fully towards the side of the playing channel, the playback will pause.
CUE/PLAY:
When the mixer’s crossfader is moved toward the channel of the player, the playback will be started from the last
Main CUE.
Touch Sensitive Adjustment
Holding this button and switching on the power will lead into the mode for adjusting the sensitivity of Touch Wheel.
Float your hand very close to the jog wheel. It will detect the sensitive value. It has to increase 2 degree from the
value detected. Use TRACK to select the value and press MEMO to save the value. Reboot for retuning to normal.
* This adjustment is only needed when finding the sensitivity difference in a specific environment.
22. PITCH BEND
Press
＋
to increase the speed and press
!
to decrease the speed.
23. PITCH CONTROL SLIDER
The pitch control will speed up or slow down the track being played to assist beat matching.
24. JOG WHEEL
Pitch mode:
Use the wheel to adjust the speed to get an even close BPM with another playing unit.
Scratch mode:
The top flat surface is used for the scratch effect. The ring of the wheel is used for adjusting the
speed of the track.
The jog wheel is also used the gain and the parameter of the digital effect.
25. TAP
Press this button with the beat to match the beats-per-minute (BPM) of the music manually. Press and hold this
button to activate Auto BPM.
26. PITCH RANGE
Switch the pitch range between 8%,16 % and 100%.
When the LED light is off, it sets under 8%.
When the LED light is on, it sets under 16%.
When the LED light is blinking, it sets under 100%.
Содержание KCD550
Страница 3: ......
