2. Use standard XLR microphone cable chain your units together via the XLR connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches
4. Turn on the all units' power, the units begins reset, and then the unit begins working.
5. Use DMX controller to control your units.
TECHNICAL SPECIFICATION
1. Voltage: AC220V/ 110V, 50HZ/60HZ, Fuse: 2A/250V
2. Rated Power: 25W
3 Laser: 50mW@532nm, green DPSS laser 100mW@650nm, red Laser
4. Working Modes: DMX, Sound Active, AUTO
5. DMX Control Channel: 8 channels
6. Graphics & Effects: laser beam patterns
7. Interface: 3 pin XLR jack for DMX linking
8. Size: 300*200*100mm
9. Weight: 3.5Kg