background image

For Your Safety

12.  The unit must be placed with the 

clearance of 25cm from side wall and 
50cm from ceiling.

13.  The unit must be correctly installed 

according to the instructions.

14.  The unit is at high temperature during 

operation. It keeps hot for a period after 
shut down. Potential danger would occur 
when touching it during this period. 
Unplug the unit and wait till it cools 
before cleaning.

15. 

DO NOT

 place the unit close to curtain 

and/or other flammable objects. 
Otherwise there will be a danger of 
catching fire.

16. 

DO NOT

 cover the unit with anything 

during operation or a short time after it is 
shut down.

17. 

DO NOT

 wrap the power supply cord on 

the unit.

18.  The unit must be handled with care, and 

avoid vibration or hitting.

19.  An apparatus with CLASS I construction 

shall be connected to a MAINS socket 
outlet with a protective earthing 
connection.

20. 

DO NOT

 use if the unit or power cable is 

damaged.

21. 

DO NOT

 attempt to repair or adjust any 

electrical or mechanical functions on this 
unit. Doing so will void your warranty. 
The inside of the unit contains no user 
serviceable parts. Servicing / Repair 
should only be performed by a qualified 
electrician or qualified service centre.

22. 

DO NOT

 use this unit in place where 

causticity or volatile air exists, i.e. dust, 
steam, gas, etc.

23. 

DO NOT

 use this unit as a cloth drier or 

towel drier.

24. 

DO NOT

 use this unit as a sauna heater.

25. 

DO NOT

 use this unit as a room heater.

26. 

DO NOT

 use this unit in place of animal 

propagating and raising.

27. 

DO NOT

 immerse this unit into water for 

cleaning.

28.  The unit should be plugged in a socket, 

which is easily visible and reachable.

29. 

DO NOT

 use this heater with a 

programmer, timer or any other 
device that switches the heater on 
automatically, since a fire risk exists 
if the heater is covered or positioned 
incorrectly.

30.  Children should be supervised to ensure 

that they do not play with the appliance.

31.  When assembling, keep clear from any 

board or flammable material.

32. 

DO NOT

 insert or allow foreign objects 

to enter any ventilation or exhaust 
opening as this may cause an electric 
shock or fire, or damage the heater.

33.  Use only for intended household use as 

described in this manual. Any other use 
not recommended by the manufacturer 
may cause fire, electric shock, or injury 
to persons. The use of attachments not 
recommended or sold by unauthorized 
dealers may cause hazards.

34.  The unit is for household use only. It 

is not safe to use on a building site, 
greenhouse, barn or stable where there’s 
flammable dust.

Содержание KLEH150-0500













Отзывы: