background image

For Your Safety

1.  Site the heater outside or in a large 

open area and well away from any 
obstructions such as branches or where 
the heater is near any objects that can 
be affected by heat, such as furniture, 
curtains or other inflammable objects 
(minimum distance 1 metre).

2.

  DO NOT

 use this heater in the immediate 

surroundings of a bath, a shower or a 
swimming pool. Do not use near water.

3. 

DO NOT

 use in unventilated areas.

4. 

DO NOT

 use where gas, petrol, paint or 

other surely flammable goods are stored.

5. 

DO NOT

 push any items through, 

obstruct or cover the grill of the heater 
head.

6. 

DO NOT

 position immediately above or 

below an electrical socket.

7. 

DO NOT

 move when connected to an 

electrical supply and always wait for 
the patio heater to cool down before 
cleaning / storing away.

8. 

DO NOT

 touch the heater head when in 

use.

9. 

DO NOT

 leave turned on and 

unattended especially when children 
and or animals are in the vicinity.

10.  The indication of the different positions 

of switches shall be visible from a 
distance of 1M.

11.  The marking concerning covering should 

be visible after the heater has been 
installed. It shall not be placed on the 
back of portable heaters.

Warning

•  This heater is not equipped with a device 

to control the room temperature. 

DO NOT

 

use this heater in small rooms when they 

are occupied by persons not capable of 

leaving the room on their own, unless 

constant supervision is provided.

•  Children of less than 3 years should be 

kept away unless continuously supervised.

•  Children under 8 years shall not plug 

in, regulate and clean the appliance or 

perform user maintenance.

Caution

•  Some parts of this product can become 

very hot and cause burns. Particular 

attention must be given where children, 

vulnerable people and animals are 

present.

•  For floor mounted heaters only use 

the heater on a firm solid horizontal 

area where all the feet on the base are in 

contact with the floor. (Should the heater 

be tilted or fall over the auto cut off switch 

will activate).

•  Risk of Electric Shock. 

DO NOT

  open or 

try to repair the heater yourself.

•  Any maintenance or repairs including 

replacing the tube(s) should only be 

carried out by a qualified electrician or by 
a qualified service centre.

Содержание KLEH150-0500













Отзывы: