background image

For Your Safety

14.  The unit must be handled with care, and 

avoid vibration or hitting.

15.  If the unit gets damaged, it must be 

repaired by professional electricians.

16.  The unit is for household use only. It 

is not safe to use on a building site, 
greenhouse, barn or stable where there’s 
flammable dust.

17.  The head of the unit is at high 

temperature during operation. 
Unplug the unit and wait till it cools 
before cleaning.

18. 

DON’T

 use this unit in place where 

causticity or volatile air exists, i.e. dust, 
steam, gas, etc.

19. 

DON’T

 use this unit as a cloth drier or 

towel drier.

20. 

DON’T

 use this unit in place of animal 

propagating and raising.

21. 

DON’T

 immerse this unit into water 

for cleaning.

22. 

DO NOT

 use this heater in the 

immediate surroundings of a bath, a 
shower or a swimming pool. 

DO NOT

 

use near water.

23. 

DO NOT

 use in unventilated areas.

24.  The unit should be plugged in a socket, 

which is easily visible and reachable.

25.  One dark point may exist on the surface 

of the heating elements during the 
first few minutes after it is turned on. 
This is normal, and will not affect the 
performance of the unit.

26. 

DO NOT

 use this heater with a 

programmer, timer, separate remote-
control system or any other device that 
switches the heater on automatically, 
since a fire risk exist if the heater is 
covered or positioned incorrectly.

27.  This appliance is not intended for use by 

person (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision 
or instruction concerning use of the 
appliance by a person responsible for 
their safety.

28.  Children should be supervised to ensure 

that they do not play with the appliance.

29.  If the supply cord is damaged, it must be 

replaced by a qualified to avoid danger. 

Warning

•  These appliances must 

be earthed.

•  Before installing or replacing the 

bulb, the appliance must be always 
being disconnected from the 
220-240V supply.

This warning symbol 
indicates that the surface is 
hot and caution is required.

Содержание KLEH111-0200










Отзывы: