background image

Warning

•  This heater is not equipped with a 

device to control the room temperature. 

DO NOT

 use this heater in small rooms 

when they are occupied by persons 
not capable of leaving the room on 
their own, unless constant supervision 
is provided.

•  Children of less than 3 years should 

be kept away unless continuously 
supervised.

•  Children under 8 years shall not plug 

in, regulate and clean the appliance or 
perform user maintenance

Caution

•  Some parts of this product can become 

very hot and cause burns. Particular 
attention has to be given where children 
and vulnerable people are present.

•  Only use the heater on a firm solid 

horizontal area where all the feet on 
the base are in contact with the floor. 
(Should the heater be tilted or fall over 
the auto cut off switch will activate)

For Your Safety

1.  Site the heater outside or in a large 

open area and well away from any 
obstructions such as branches or where 
the heater is near any objects that can 
be effected by heat, such as furniture, 
curtains or other inflammable objects 
(minimum distance 1 meter).

2. 

DO NOT

 push any items through, 

obstruct or cover the grill of the heater.

3.  Suggest follow the standard statement: 

The heater must not be located 
immediately below a socket outlet.

4. 

DO NOT

 move when connected to an 

electrical supply and always wait for 
the patio heater to cool down before 
storing away.

5. 

DO NOT

 touch the heater when in use.

6.  The indication of the different positions 

of switches shall be visible from a 
distance of 1m.

7.  The unit must be placed with the 

clearance of 100cm to the wall.

8.  The marking concerning covering should 

be visible after the heater has been 
installed. It should not be placed on the 
back of portable heaters.

9.  The unit must be securely placed on a 

horizontal and flat surface.

10.

 DON’T

 place the unit close to curtains 

and/or other flammable objects. 
Otherwise there will be a danger of 
catching fire.

11. 

DON’T

 wrap the power supply cord on 

the unit.

12.  The unit must be securely grounded 

during operation.

13.  The unit must be handled with care, and 

avoid vibration or hitting.

Содержание KLEH111-0200










Отзывы: