15
www.KALORIK.com
VC 47706 - 201010
2.
Lift out post-motor HEPA filter.
3.
Shake to remove dust. Wash the filter under running cold water.
4.
Completely dry the filter before assembling.
Note
: It is recommended to wash the HEPA filter after six months of
regular use, to maintain the vacuum’s performance. If the HEPA filter
becomes heavily soiled, it is recommended to replace with a new filter.
TROUBLESHOOTING
ISSUE
POSSIBLE REASON
POSSIBLE SOLUTION
Indicator lights
on the floor
head are
flickering
1.
The rolling bar
is wrapped
2.
Temperature is
too high or low
1.
Clean the rolling
brush
2.
Move the vacuum
to suitable
temperature
The floor head
does not work
The floor head is
blocked by debris or
hair
Ensure that no hair or other
thread is trapped around
the brush and check brush
area for larger debris
Running time
shortened
1.
Battery needs
to be
replaced
2.
Ambient
temperature is
too high or too
low
3.
Battery is not
fully charged
1.
Contact the
manufacturer to
replace the
battery at the
user's own cost
2.
Move the vacuum
to suitable
temperature
3.
Charge the battery
