7
www.KALORIK.com
VC 44287 - 170120
seconds and will then automatically turn off, to signify that the
battery is fully charged.
2.
Charge on base
•
Place the base on a flat, horizontal, stable surface that is not
exposed to direct sunlight or humidity
, and far from any heat
source.
•
Remove the rubber cover on the base to access the charging pins
on top of the charging station.
•
Make sure the appliance is set to off, and all the accessories are
removed.
•
Plug the charger into the side of the base, and then plug it into a
wall socket.
•
Place the battery into the charging base, making sure that the
connection pins on the base are straight and not crooked. The
battery should insert perfectly into the base
•
The LED light on the base lights up red, and will start blinking, to
show that the battery is charging.
•
When the battery is fully charged, the LED indicator light should
glow solid red (it will no longer blink).
Note: To remove the battery from the base, simply press the 2 buttons
on each side of the battery and lift it out from its cradle.
Note: We recommend keeping your appliance always in charge when
not in use, this way it will keep a full charge and will always be ready for
use when you need it.
