6
USK JK 23431 - 091125
only the thermostat is switched off in case of overheat, whereas
the switch stays in ON-position.
•
If this happens, switch off the appliance by putting the switch in
OFF position and wait about 10 minutes for the element to cool.
Then pour in sufficient cold water to cover the element. This will
reset the safety device.
•
The kettle may then be used as normal.
CLEANING AND MAINTENANCE
•
Before attempting any cleaning operation, make sure the
appliance is unplugged from the supply socket and fully cooled
down.
•
To clean the exterior surfaces, simply wipe over with a soft damp
cloth and dry thoroughly.
•
Never use abrasive products
•
On no account shall the jug kettle or its power base be immersed
in water.
FILTER
•
Your appliance is provided with a spout filter. When you want to
boil water, settle the filter first. The filter needs to be in place for
the kettle to work. Removing the filter will cause dysfunction in the
auto-shut off mechanism.
•
When the lid is open, you can remove the particle filter by taking
it out of the spout and clean it under running water. Put it back
after cleaning.
•
Filter should be rinsed clean regularly.
DESCALING – REMOVING MINERAL DEPOSITS
To remove scale from the jug kettle, use products made especially
available for this purpose. Make sure to use a type recommended
for kettles or coffee makers.
