5
USK FHG 30035 - 100107
temperature. When the appliance reaches the desired
temperature, the green pilot light will light up.
•
Position the fat collecting tray near the spout on the side of the
appliance.
To Use as a Contact Grill
Use the Grill as a contact grill to cook burgers, boneless pieces of
meat and thin cuts of meat and vegetables.
•
Set the Grill Toaster Temperature Control to your desired setting.
At first, try a setting in the “max” setting. You may later adjust it
lower or higher according to your preference.
•
Prepare the burgers, boneless pieces of meat and thin cuts of
meat or other foods as directed and place it onto the bottom
cooking plate.
•
Close the top cooking plate which has a floating hinge that is
designed to evenly press down on the food. The top plate must
be fully lowered to achieve Grill marks on the selected foods.
•
When the foods is cooked use the handle to open the lid.
Remove the food with the help of a heat-resistant plastic or
wooden spatula. Never use metal tongs or a knife as these can
cause damage to the non-stick coating of the cook plates.
•
NOTE : The ribs on the grill plates combined with the grease spout
at the corner of the plate allow the grease to drip from the meat
and drain off the plates.
Cooking with less fat
•
If you want to cook with less fat, you can get rid of the excess
cooking fat by using the slanted feet at the back of the
appliance. This will provide the contact grid with a slope that will
help evacuate the extra fat near the front edge of the cooking
plate, and towards the fat collecting tray.
