Kalorik RVC 46588, Руководство пользователя

Страница: 11 / 32

11
www.KALORIK.com
RVC 46588 - 200501
5. “Auto”
a. Under operating mode, the vacuum will start sweeping in a
zigzag pattern as shown below.
b. Under standby mode, the vacuum will not respond to this
command.
6. “Respond”
a. Under operating mode or standby mode, the vacuum will
beep to allow you to find it if you press this button.
NOTE :
‒
After you select a sweeping mode, the Robot Vacuum can
change to another mode automatically depending on the
environment. This is done to achieve the best sweeping results
possible.
‒
Under any sweeping mode the Robot Vacuum will stop working
if you press the START/STOP button on either the remote or the
power button on the appliance.
CLEANING AND MAINTENANCE
Follow the instructions below regularly to clean and maintain the Robot
Vacuum.
1. If side brushes are dirty, please wash them carefully with clean
water and let them dry naturally before using again. If they are
damaged and cannot operate correctly, they should be replaced.