Kalmar DRF420-60S5 страница 79 Скачать руководство пользователя

Страница: 79 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

1 Engine – 1.8 Lubrication

Do not tighten the oil plug with higher tightening torque,
the threads will be damaged.

10 Fill with engine oil. For volume and grade, see section

F Tech-

nical data

11 Start the engine, let it idle and check that the drain plug and fil-

ters do not leak.

12 Turn off the engine and check the oil level, see

Oil level, check-

ing page 23

. Top up if needed.

13 Remove the collection container, handle the engine oil and fil-

ters as environmentally hazardous waste.

page

–

Oil and oil filter, change (engine alternative
Cummins)

1 Run the engine until warm.

2 Machine in service position, see section

B Safety

3 Remove the protective plates over the oil filling point for the en-

gine and transmission.

4 Place a receptacle underneath the engine.

5 Remove the drain plug on the engine and drain the engine of oil.

6 Place a receptacle under the oil filters.

7 Clean the area around the oil filters.

C A U T I O N

Avoid skin contact with the oil, use protective
gloves.

Hot oil may cause burns, rashes and irritation!

https://www.forkliftpdfmanuals.com/

Содержание DRF420-60S5

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DRF420-60S5

Отзывы:

Похожие инструкции для DRF420-60S5

Бренды по названию

Популярные бренды

Kalmar DRF420-60S5, Руководство по обслуживанию

Результаты поиска

Содержание DRF420-60S5

Отзывы:

Похожие инструкции для DRF420-60S5

Бренды по названию

Популярные бренды