Kalmar DRF420-60S5, Руководство по обслуживанию

Страница: 232 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
16 8 Control system – 8.4 Diagnostics
page –
Diagnostic test, work instruction
To select diagnostic test, proceed as follows:
1 Navigate to the service menu.
2 Press Enter.
3 Enter code for diagnostic test.
Code is obtained from Kalmar Industries Support.
NOTE
The code determines which service menu is activated (Di-
agnostic test, Initiation or Calibration).
Pos. Designation Description
1 DIAG Indicates that diagnosis has been selected. There is also initiation (INIT) and calibration (CAL-
IB).
2 CAB Indicates which menu group is selected. These groups are available:
CAN/POWER - for diagnosis of CAN-bus and power supply.
LIGHTS - for diagnosis of lighting and lights.
CAB - for diagnosis of components in cab.
CLIMATE - for diagnosis heating and ventilation system.
HYD - for diagnosis of common hydraulics and brakes.
ENGINE - for diagnosis of engine.
BOOM - for diagnosis of lift, lower and extension.
ATTACH - for diagnosis of attachment.
OP - for diagnosis of overloading system.
EXTRA - for diagnosis of optional functions.
HIST - not used.
3 2 Number of menu in question (menu group CAB contains several menus in a loop).
4 (10) Total number of menus in the group CAB.
5 Variable Signal that is measured. Here are a few examples.
SWITCH refers to switch windshield wiper.
OUTPUT refers to status for a supply, in this case supply of the wiper motor.
FEEDBACK refers to a feedback signal, in case signal from wiper motor when it operates.
6 Signal value Measured value or status of signal for variable on the same row.
7 FRONT WIPER Name of the function that can be controlled. FRONT WIPER means windshield wiper front.
000056
1 2 3
4 5
000060
https://www.forkliftpdfmanuals.com/