2. Install the Sink
For wood frame installations,
drill 1/4
″
(6 mm) mounting holes
at the marked locations on the finished wall.
For tile or mansonry wall installations,
anchors (provided) are
required. Drill 1/2
″
(13 mm) mounting holes at the marked
locations on the finished wall and insert the anchors.
Install hanger bolts (provided) in the wall so they extend
1
″
(25 mm) beyond the finished wall.
Install the faucet and drain to the sink according to the
manufacturer’s instructions.
Position the pedestal on the floor.
Carefully set the sink on the pedestal so the hanger bolts extend
through the sink anchoring holes.
Position the sink as desired.
Install the nuts (provided) to the hanger bolts. Level the sink, and
carefully tighten the nuts until secure. Do not overtighten.
1"
(25 mm)
Hanger Bolt
Nut
Kallista
5
1008428-2-C
