INSTALLATION INSTRUCTIONS
Toilet
1142313_2_A
2 of 9
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
ImPORTANT INFORmATION
CAUTION: Risk of personal injury.
If the new toilet is not installed immediately, temporarily place a rag
in the closet flange. Hazardous gases may leak from the flange opening if it is not blocked.
CAUTION: Risk of product damage.
The tank-to-bowl connection bolts must be securely tightened. Use
a long screwdriver to tighten them. A short screwdriver may not be sufficient due to the confined space in
the tank.
NOTE:
If a baseboard causes the rough-in to be less than 12″ (30.5 cm), it must be cut or removed to allow
space for the toilet.
ImPORTANT!
Do not lift or rock the bowl after placement. If you break the watertight seal, you must install a
new wax seal.
NOTE:
The toilet pictured in the installation steps may differ from the model being installed.
Observe all local plumbing and building codes.
KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
TOOLS
3/8”
Wax Seal