INSTALLATION INSTRUCTIONS
Kitchen Faucet with Remote Valve
1104263_2_A
2 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BeFORe YOU BegIN
IMPORTANT! keep these instructions after installation. They contain servicing and warranty
information.
CAUTION: Risk of fresh water contamination. To prevent water contamination, do not remove any
components from this faucet. This faucet contains back-siphonage protection.
NOTICe: Due to the non-standard 2″ (5.1 cm) diameter of the remote valve, the remote valve cannot be
mounted through a standard 1-3/8″ (3.5 cm) faucet hole of a sink. Instead, choose a sink without faucet holes
then mount the faucet and remote valve through the countertop. Refer to the countertop manufacturer for
proper hole drilling.
Observe all local plumbing and building codes.
Shut off the water supplies.
Inspect waste and supply tubing for damage. Replace if necessary.
Before installation, unpack the faucet and inspect for damage.
For new installations, assemble the faucet to the sink before installing the sink.
Kallista reserves the right to make revisions in the design of faucets without notice, as specified in the Price
Book.
INSTALLATION
NOTe:
1.
Locate the remote valve within 8” (20.3
cm) of the spout. Refer to the countertop
manufacturer for proper hole drilling.
1-3/8” (3.5 cm) D. Max
2-1/16” (5.2 cm) D.
8” (20.3 cm) Max
Spout Hole
Valve Hole
Remove the diverter housing.
2.
NOTe: DO NOT remove the
plug for the optional
sidespray.
Diverter Housing
Plug
Press to remove.
