2. Instale las manijas
Retire la tuerca de la manija (sólo para modelos de manija de
palanca).
Gire el bonete hacia la izquierda y retírelo de la válvula.
Enrosque la tuerca del vástago hacia abajo en la válvula de
acuerdo al espesor de la superficie de montaje.
Cierre la válvula (caliente = a la derecha, fría = a la izquierda).
Por debajo de la superficie de montaje, deslice el vástago de la
válvula en el orificio de fijación correcto (caliente= izquierda, fría
= derecha).
Vuelva a enrroscar el bonete en la válvula, cerciorándose de que
la manija quede en la posición cerrada y bien alineada.
Apriete con una llave la tuerca del vástago de la válvula,
manteniendo la manija en la posición final de instalación.
Ajuste la manija a la posición cerrada deseada.
Vuelva a instalar la tuerca de la manija. Apriete con cuidado.
Repita los pasos anteriores para instalar el otro montaje de
manija.
Tuerca de
la manija
Tuerca del
vástago
Vástago
Chapetón
Manija
Bonete
1004811-2-A
Español-3
Kallista
Содержание P22121
Страница 23: ...1004811 2 A...
Страница 24: ...USA Canada 1 888 4 KALLISTA Fax 1 888 272 3094 kallista com 2006 KALLISTA 1004811 2 A...