INSTALLATION INSTRUCTIONS
Single Basin Stainless Steel Sink
1154432-2_#1827948_B
3 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
1. PREPARATION (WOOD FRAME INSTALLATION)
Clearance for the Sink Basin
Wood Frame
Apply silicone sealant.
Verify cabinet clearance.
Construct a wood frame for the inside of the cabinet. Allow adequate clearance for the faucet valving and
sink basin. Ensure the frame will support the entire sink rim.
IMPORTANT!
For the larger sinks, install the frame only on the front and sides of the sink at this time.
IMPORTANT!
The frame should be located so that once the sink is installed, the top of the sink rim will be flush
with the top of the cabinet walls.
Position the wood frame within the cabinet and secure. Locate the fasteners for easy access in case the
sink needs to be removed.
Apply a 1″ (2.5 cm) bead of sealant at each corner of the wood frame where it will contact the sink.
