INSTALLATION INSTRUCTIONS
Inigo Console Table
1095725-2-A
Page 5 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Three faucet holes have been partially drilled from the underside of the console top.
On the top, show surface, of the console top, locate the center of the required faucet holes. Using a com-
pass or circle template, draw a circle for the required holes.
Using a small hammer, create the faucet hole(s) by gently tapping the console top within the circles until
the stone breaks away.
NOTe:
dO NOT
strike the console top with too much force.
dO NOT
strike from the bottom side of the console
top. This will damage the top surface of the console top.
Using a file or sanding cylinder, complete the removal of stone material to create a clean round hole.
Backsplash
Console
Top
Attach backsplash to console table and wall with clear silicone.
Connect the water supply and check for leaks.
STONe TOP HOLe FABRICATION (OPTIONAL)
5.
COMPLeTe THe INSTALLATION
6.
