Kalley K-LED43FHDST2, Руководство по обслуживанию

Страница: 11 / 41

3 / 13
ITEMS
Default
Setting
Description
St
at
us
1-Factory hotkey Off
Factory hotkey Switch (OFF/ON).Should be OFF
after factory alignment
OK
2-WARM-UP Off
OFF
：
The set would enter standby mode after
15 minutes without input signal
；
ON
：
Aging mode. Aging time will display on
the left bottom of screen.
NOTE: Enter and exit the aging mode method: 1,
press on the remote control Left and right the cursor
keys will Factory hotkey set to ON; 2, WARM UP is set
to ON; according to the panel on the "menu" button to
exit the aging mode
OK
3-ADC ADC calibration
（
refer as follow
），
NOTE: Not
adjust
OK
4-White balance White Balance data adjustment
（
refer as
follow
）
The balance data is set by PE before the mass
production. Do not need adjust.
OK
5-SHOP
init(Option) DO Reset the set after production
alignment;(This operation will remove all
unnecessary factory value; The factory
hotkey will be turn off)
OK
6-NVM reset DO System initialization. Restore all data
except the White Balance and ADC data ;Only
for R&D. OK
7-Preset Factory
Channel DO/HZ Preset specific factory channels for
specific factory. Press left and right
button to select the factory, and then press
OK to confirm. OK
8-Power on mode LAST On: Always turns on TV when AC power on
STB
：
Always goes to standby mode when AC power
on
LAST
：
Restore the status before the last AC
power off
OK