Kalley K-LED40FHDST2, Руководство по обслуживанию

Страница: 21 / 35

Appendix
q
“How to change ProjectID with RCU”
¾
Process following subsequence IR codes to change project ID:
MENU+xxx
(xxx: Project ID, ex: 001)
¾
Restart TV
Appendix
r
“ How to upgrade MAC Address
¾
Upgrading MAC address need to use the tool in factory and through serial
command, the specific methods according to the operation of the factory
guidance.
Appendix
s
“Instructions of Updating SW”
1. The following IC should be pre-copied before SMT process
Position PART TYPE Part Number SW
U301
（
CPP
）
IC-TSOP48 13-FS29F2-G0B Mboot, Main Software
2. The MAC Address, HDCP KEY, Device ID must be upgrade by debug port
into U301.
8, Project ID selecting
1) Press the Menu button of remote control, then select Contrast item
of Picture submenu; press 1,9,5,0 consecutively, there you go the
Design Menu.
2) Select the SERVICE MENU item, press OK and RIGHT button of the remote
to enter submenu,
3) Select the PROJECT ID item, press OK or RIGHT button of the remote
to enter the submenu;
4) Press the right or left button of the remote to select the ID you want;
5) After ID selection, press MENU button of the remote to exit DESIGN
MENU.
6) Finally, do AC power on/off.