Kalley K-LED40FHDST2, Руководство по обслуживанию

Страница: 17 / 35

8-Power on mode LAST On: Always turns on TV when AC power on
STB：Always goes to standby mode when AC power
on
LAST：Restore the status before the last AC
power off
OK
9-USB
UPDATE(option) USB update， （refer as follow）
Sub-item Value Note
Main Upgrade
Upgrade software
MEMC Upgrade
Upgrade MEMC
HDCP Uprade
Upgrade HDCP
Mboot upgrade
Upgrade Mboot
CI KEY Upgrate
Upgrade CI KEY
NVM Upgrade
Upgrade NVM
NVM backup
Backup NVM
CH list Upgrade
Upgrade CH list
CH list backup
Backup CH list
NetflixESN Upgrade
Upgrade ESN
MAC Upgrade
Upgrade MAC Addre
10—Deviceld test This item only factory used， ok
5. Debugging
5.1. General Steps of debugging
According to the requirement of the order, below steps are needed for
appropriate setting.
1) Enter the Factory Menu, enable FAC HOTKEY.
2) Check Project ID and the version of software, release date displayed
at the bottom of Factory Menu.
3) Enter Design Menu, choose SERVICE MENU->Project ID, choose
corresponding Project ID number of the product (Refer to the
“V6-PROJECT -ID0**”in the BOM list).
4) Return to Factory Menu, check the Product model.
5) Choose Factory Menu->NVM RESET and press the right button of the
remote and wait until prompt OK appears.
6) Restart the set
7) According to the requirement of the order, Set the items of SHOP
INIT and Hotel Menu etc.