background image

66  

  

I General User Manual

31   Warranty  conditions

Read 

 Chapter 27 "Care and maintenance of the bike"

 

carefully. Comply with the inspection and maintenance 
intervals specified in 

 Chapter 28 "Regular inspections"

 

Compliance with the service intervals is a prerequisite for 
the assertion of warranty claims.

The statutory warranty period is two years. This starts 
when the bike is handed over by the specialist cycle shop 
who is also your contact partner for warranty claims.

As proof of purchase and date of handover, please retain 
the handover document signed by both parties and record 
of purchase, such as the invoice and/or sales receipt, for 
the duration of the warranty period.

31.1   Prerequisites for the validity  

of warranty claims

 

Manufacturing, material or information error.

 

The problem or error already existed at the time of 
handover to the customer.

31.2   Warranty  exclusions

A warranty claim applies only for the initial faultiness of 
the defective part. The following are excluded from the 
warranty:

 

Damage caused by use in competitions, improper 
use and force majeure (see 

 Chapter 6 "Intended 

use"

).

 

All parts that are subject to function-related wear, 
providing this is not a production or material fault 
(see 

 Chapter 27.2 "Wear parts"

).

 

Damage caused by incorrect or insufficient care 
and unprofessional repairs, conversions or replace-
ment of components on the bike. This User Manual 
contains detailed information on how to look after 
your bike.

 

Accident damage or damage caused by other ex-
ternal factors, providing this is not attributable to 
incorrect information or a product error.

 

Repairs carried out with used parts or damage that 
occurs as a consequence of this.

 

Special equipment or accessories or non-standard 
equipment; especially technical changes, i.e. to the 
gearshift system or the bike fork and frame geom-
etries.

 

Non-compatible add-on components that were not 
part of the scope of delivery at the time the prod-
uct was handed over, or damage caused by unpro-
fessional installation of these add-on components.

Содержание Bosch Active Line







































































































































































































































Отзывы: