•
The device list will show the GE1337P2 if connected to the PC. Click next.
6. After upgrade is complete click Finish and unplug the KeyMander 2 from the PC.
7. Reconnect the KeyMander 2’s USB to the PC, then press and hold BTN 1 and BTN 2 together for
approximately 8 seconds to perform a factory reset to complete the firmware update.
•
The LED light will turn white and cycle from left to right to indicate it is in firmware upgrade mode
Factory Reset Function
To reset the KeyMander 2 to factory settings, make sure it is powered on and press Button 1 and Button 2
together for approximately 8 seconds.
•
The LED light will turn white and cycle from left to right to for approximately 3 seconds indicating unit
has been reset to factory settings.
Understanding Mouse Performance with KeyMander 2
To help better answer some of the common questions about mouse performance, here's some basics
about several things that determine how the mouse responds in-game: Sensitivity Setting, Maximum
Turn Speed, Turn Speed Setting, Deadzone Setting and Resolution.
The biggest reason to love KeyMander 2 can quickly become a frustration if the mouse isn’t setup
properly, so here is some information that may help you to better dial in your mouse settings.
KeyMander 2 is designed to provide as close to a PC gaming experience as possible on a game
console, however there are a couple significant differences between playing on PC and using a
keyboard and mouse with your console. Understanding differences in maximum turn speed and
learning how to work with mouse sensitivity and acceleration are the keys to playing at the highest
level with KeyMander 2. Getting to that level requires some also time spent learning how your mouse
settings translate into the game, and also understanding the limitations of console games.
Sensitivity Setting
Properly setting mouse sensitivity is the biggest factor in getting good mouse performance with your
KeyMander 2, and there is more to it than simply adjusting the sensitivity sliders in the K2 App. There
are actually three other steps required before adjusting the software sliders, and forgetting them will
lead to poor mouse performance. The first and most commonly overlooked step in properly setting up
the mouse is actually making sure the aim/look sensitivity is maxed out in the game’s settings menu,
so you have the full sensitivity range to work within. Next, you need to input the mouse’s DPI
resolution setting into the K2 App Device tab for a smoother and more accurate adjustment range.
Third, most gaming mice have a DPI button with multiple settings so make sure the mouse is set to
the highest DPI step when connected to KeyMander 2. Only after those steps are complete do you
begin making changes to the mouse sensitivity sliders.
Just like in PC gaming, bumping the sensitivity too high will cause you to reach a point where
movement can become jittery and difficult to use accurately for precision shots, so reaching a balance
is important. In the PC world this equates to the balance between low DPI and high DPI settings,
where lower DPI is far more accurate for making small, precise movements (like needed for
