KALI AUDIO IN-8 Studio Monitor User’s Guide
14
First Time Setup
• Before you plug the speaker in, make sure that the power switch is in the OFF position
• Plug the speaker in
• Connect audio cables
◊
If you’re connecting RCA, make sure that dip switch #8 is switched UP to the ON posi
tion
◊
If you’re connecting XLR or TRS, make sure that dup switch #8 is switched DOWN to the
OFF position
◊
Do not connect more than one audio cable to the speaker at the same time.
• Turn the volume knob counter clockwise as far as it will go
• Turn the speaker on
• Start playing material from your playback device at a low volume
• Slowly turn the volume knob clockwise to the center detente, -0 dB position. Make sure you hear what
you’re playing
• Set the boundary EQ for your application. Refer to page 11 above.
• Repeat these steps for every speaker you’re using.
• Sit in your listening position, and turn the volume up on your playback device to the desired level
• Enjoy your new studio monitors!
Climate Considerations
• The IN-8 studio monitor’s enclosure is made of MDF wood and wrapped in vinyl, which is sensitive to
heat and humidity. The product should be kept and used in a climate-controlled environment. Exposure
to direct sunlight, moisture, or consistent humidity above 65% may cause the vinyl to peel and wrinkle.
This is not covered under warranty.
