Kalfire E-one 100F, Руководство пользователя

Страница: 33 / 36

33
Instructions for cleaning the glass reflector:
•
Clean the glass only with water:
cleaning products are not
recommended.
•
Dust or dry the glass with a clean
microfibre cloth.
•
Always dry the glass completely: water
residues are difficult to remove.
Do not use cleaning products, abrasives,
cerium oxide, etc. to clean the glass reflector,
and never use hard materials such as steel
wool, razor blades, etc. on the glass.
To clean the glass reflector, first remove the
front glass panel from the fireplace, following
the steps shown in figures 1 to 3.
1.
2.
3.
Troubleshooting
In the event of a fault, first check the points
below. If the problem persists, contact your
dealer or installer.
The fire does not start.
• Check that the main switch at the
top right of the appliance is
switched on. (See section 5.4.)
The remote control is not responding: the
red light at the top left of the remote
control is not lit and the Bluetooth symbol
is visible in the fireplace.
This indicates that there is no connection
between the remote control and the fireplace.
•
Pair the remote control with the
fireplace. (See section 5.2.)
•
Replace the batteries of the
remote control.