Kalenji CW 500 Play SD, Руководство для начинающих

Страница: 3 / 4

EN
EN
3. Fitting the sensors.
3.1. Accelerometer (speed and distance).
1
2
3
- Slide the clip beneath the shoelaces, lengthwise, on the flattest part of the shoe (an angle of more
than 30° from the ground may compromise measuring accuracy).
- Clip the accelerometer (oval capsule) below the rear groove of the clip, with the notch of the
accelerometer towards the toes.
- Press on the tip of both clip and accelerometer to clip the accelerometer notch into the clip slot.
- Tighten your laces to make sure the accelerometer stays in place.
- To release the accelerometer, press on the front tab of the clip.
3.2. Heart rate belt.
Setup
1
sensors
2 3
Reception cone
*118.08 inches
4. Using the watch.
4.1. Button functions.
1. : Back to previous menu, note
intermediate times manually.
2. : previous choice in the list, increase a
value, choose one of the predefined displays
during the run.
3. OK: To access the menu, confirm your
choice or start/stop the stopwatch during a
session.
4. : next choice in the list, lower a value,
choose one of the predefined displays
during the run.