Kalenji CW 500 Play SD, Руководство для начинающих

Страница: 2 / 4

EN
EN
This Starter guide gives a quick and easy introduction to using your CW 500 Play SD watch. To find
out about all the features and functions of your product, please refer to the full notice available on
www.Kalenji.com / assistance section.
1. Composition of your product.
Watch
Accelerometer
Heart rate belt
2. Starting out and settings.
2.1. Switch the product on.
When using it for the first time, you must set it. Switch the watch on by pressing on one of its buttons.
PRESS
on one of the buttons
2.2. Setting your watch.
Set your product by specifying in turn your language, units, sex, age, weight, height, time and date.
Français
Language
Back
Previous choice in the list
Confirmation
Next choice in the list
5 years
Age
Back
Increase the value
Confirmation
Lower the value
If your watch has already been switched on, access these settings by pressing on OK then selecting
“Settings” by pressing on then selecting “User” by pressing on OK.
2.3. Energy saver.
The CW Kalenji 500 Play SD watch is delivered in “ energy saving ” mode for longer
battery life.
When this function is activated, the watch goes into stand-by after 5 minutes of inactivity:
the screen switches off automatically. To display the time again or use the various
functions of your watch, simply press on one of the buttons.
If you prefer permanent time display, you can disactivate this function in Settings/watch
(see chapter 4.2, Main modes to get to these settings).