27
EN
12.4.3. Display mode without sensor.
In the event you are not using any of the sensors (accelerometer and heart rate monitor belt), the number of
indicators displayed is automatically reduced:
In Free mode:
- Row 1 = stopwatch;
- Row 2 = the lap time (by default) or the time (press on the button ).
- In Intervals mode:
- Row 1 = stopwatch;
- Row 2 = the phase in progress (warm-up, action…) or the time (press on the ).
- In Challenge mode:
- Row 1 = stopwatch;
- Row 2 = the lap time (by default) or the time (press on the button ).
Challenge mode without the use of the accelerometer is of no use in that the essential information required by
this mode (speed and distance) is not being recorded.
12.5. Your sensors .
Your sensors are represented by the following symbols on your watch:
- Accelerometer.
- Heart rate monitor belt.
- "S&D Connect" data transfer USB flash drive.
12.5.1. Pairing the sensors .
Each sensor (accelerometer or heart rate monitor belt) has a unique identification number that
cannot be changed. When a sensor is activated, it automatically transmits its identification number
to the watch.
- The accelerometer is activated as soon as it begins to move. After a few minutes without move-
ment, it automatically switches to power-saving mode and no longer transmits.
- The heart rate monitor belt is activated as soon as it is moistened and fitted to the chest.
1
2
3
Sensors
The pair function , allows the watch to detect the activated sensors located within 10 metres and
memorizes their identification numbers.
You must move away from any other sensors in the vicinity during this phase to
prevent your watch from pairing with them.
