24
EN
A beep will warn you at each lap, the information relating to the com-
pleted lap will appear for 5 seconds (split time since the beginning of
the session, lap number, lap time or distance).
lap 1
12.3. Your watch .
You can set the following parameters in this menu:
- The time.
- The date.
- The alarm: when this is activated, the alarm will sound for 1 minute. If the
button is pressed, the alarm
stops and starts again 5 minutes later. Pressing on the other buttons will definitively stop the alarm for the day.
It will sound on the following day if it is not deactivated.
- The beep: beep sounds when pressing buttons.
- The light: this is where you can activate a rapid mode. In rapid mode, a single press of any button triggers the
back light for 5 seconds. A subsequent press triggers the function. This gives you rapid access to the light when
running at night. This mode is deactivated after a period of 3 hours.
In normal mode, only a single press on the
button triggers the backlight.
12.4. Your display .
This is how to manage the list of indicators through which you can scroll in your 3 modes: FREE, INTERVALS and
CHALLENGE. Initially you select the line number that you want on the screen during your running sessions and
then, secondly, you select your indicators.
12.4.1. Number of indicators on the screen .
By default, the watch gives you 3 on-screen indicators:
1
Information row 1.
2
Information row 2.
3
Information row 3.
1
2
3
The 2-line mode allows you to display the 2
nd
row in a bigger format:
