31
converting the 24 fps film content to 60 fps. At 60 fps, this projector is not able
to accept deep color, so Strato is sending standard 24-bit (8 bits per
component) color to the display.
With this projector, the installer should consider configuring Strato to allow
display mode changes when starting movie playback. This would allow Strato to
switch to 24 frames per second on film content, which would in turn allow Deep
Color information to be passed to the display.
One final example:
In the example above, Strato is playing Blu-ray quality content, which is natively
1080p. In addition to converting the frame rate from 24 frames per second to
60, it is also up-scaling the content to 2160p.