KALE AIRFREE Series, Быстрый старт

Страница: 8 / 15

-7-
INSTRUCTION MANUAL
www.kalefans.net
3. Specification of parameters for cont rol system
LCD display status confirmation
User setting interface description
After the controller is powered on, when the switch points to ON, the machine is
powered on, and the LCD displays: given rotating speed, operating current, input
voltage, operating status, whether "output rotating speed" is locked, failure
interface and other specific interface information as follows:
Operating interface Standby interface Accelerating interface
Setting interface Failure interface Decelerating interface
User setting interface description
In the standby state, long press (more than 2s) knob to enter the " Setting interface",
and the setting interface functions are as follows:
S00
S01
S02
S03
Top left: Setting rotating speed
Lower left: Voltage
Right: Operating Top left: Setting rotating speed
Lower left: Voltage
Right: Standby Top left: Setting rotating speed
Lower left: Voltage
Right: Accelerating
Line1: Setting
Line2: S00 Return
Line3: S01 Rotating speed unlocked
Line4: S02 Motor Self-learning
Top left: Failure Code
Lower left: Please contact factory
Right: ER Logo
Top left: Setting rotating speed
Lower left: Voltage
Right: Decelerating
Function code
Description Explaination
Reture
Rotating speed unlocked/
rotating speed locked
Motor Self-learning
Operation direction switch
Function can be used to return to the main
interface/if it doesn’t return by this function,
and it will automatically return to the main
interface after 10s.
After locked: the adjusting knob will not change
the given rotating speed to prevent accidental
touch, and select this function again to unlock
the rotating speed.
The motor operation control effect is better after
self-learning.
If the motor runs in the wrong direction, the motor
direction can be switched by this function.
RUN
Fan Speed
50
RPM
1.5
V
ER
E.0LF [1909]
contact us
Set
S00 return
S01 Speed lock
S02 Motor learning
Fan Speed
50
RPM
1.5
V
Fan Speed
50
RPM
1.5
V
Fan Speed
50
RPM
1.5
V
ACCEL
DECEL
Error code
STANDBY
S02 Motor learning