KALE KILIT KD050/10-360, Введение и руководство пользователя

Страница: 17 / 24

17
1. INTRODUCTION
This series of product is a new generation of multifunctional standalone access control. It
adopts new ARM core 32-bit microprocessor design, which is powerful, stable and reliable.
It includes reader mode and standalone access control mode etc. It’s widely applied to
different occasions, such as offices,residential communities, villa,bank and prison etc.
2. FEATURES
• Read 13.56 MF Card
• Operate by infrared remote control
• Contains reader mode, the transmission format could be adjusted by users.
• Support admin add card, admin delete card and setting card
• 10,000 card users
• The unlocking signal adopts NO,NC,COM output of relay
3. TECHNICAL SPECIFICATIONS
• Operating Voltage: DC 12-24V
• Standby Current:
≤
35mA
• Operation Current:
≤
100mA
• Operating Temperature: -20˚~60˚
• Operating Humidity: 0%~95%
• Maximum Rated Current:
≤
1A
• Door Relay Time:0~99s (adjustable)
4. INSTALLATION
• Remove the back cover from the keypad using the supplied special screw driver
• Drill 2 holes on the wall for the self tapping screws and dig a hole for the cable
• Put the supplied rubber bungs into the two holes
• Fix the back cover firmly on the wall with 2 self tapping screws
• Thread the cable through the cable hole
• Attach the keypad to the back cover. (See the figure below)