KALATEL Calibur DVMRe, Руководство пользователя, Страница: 18 / 80

Calibur DVMRe - 18 - 0150-0138D
Disk Nearly Full Notification
When the recorder has less than 10% of its disk space available, the unit will begin toggling between
the Multiscreen and Full screen, displaying (on the Full screen display) an on-screen notification
indicating that the disk is nearly full.
MESSAGE
The operator has the option to let the unit stop recording when
the disk is full, or command the unit to continue recording when
the disk becomes full, by recording over the oldest recorded
information.
On the Full screen display, this pop-up menu will appear.
Pressing the record button now will continue recording and begin
overwriting data.
Recording will stop
when disk is full.
Press RECORD to
continue.
The percentage of space remaining on the hard disk and the amount of time until recording is stopped
is indicated on both Full screen and Multiscreen displays.
MESSAGE
If the operator allows the disk to become full, this dialog box will appear.
Press the Enter button to clear the dialog box and return the unit to
Stop mode. The unit will not continue recording again until the operator
pushes the
Record button.
Recording stopped.
Disk Full.
Monitor-A Displays During Recording
Multiscreen Display
During Recording, press the Multiscreen button to activate the multiscreen
display on Monitor-A. Repeatedly pressing the Multiscreen button
advances the display to the next multiscreen. For detailed information
about Multiscreen displays, see section 3.1
.
Multiscreen Button
Multiscreen Display with Sequencing
If a multiscreen display does not include all of the cameras, the remaining
cameras can be sequenced in the bottom right cameo. While in a multiscreen
display, press the
Sequence button to begin sequencing. For detailed
information about sequencing, see section 3.3.
Sequence Button
Full Screen Display
1
Select any camera for Full Screen display by pressing the Number button of
the desired camera.
Number Button
Sequenced Full Screen Display
While in a Full Screen display, press the Sequence button to begin full
screen sequencing. The sequence list and dwell times are programmable.
For detailed information about programming the sequence list see section
3.3
. For detailed information about configuring the dwell times in the menu
system, see section 7.3.
Sequence Button