0150-0193A 9
Calibur
DVMR
e
Triplex
1.7 The Rear Panel
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
B
B
SVH
S
SCSI
RS-232/1
RS-485/1
RS-485/2
RS-232/2
ETHERNET
10/100
1. Camera
Inputs:
BNC connector, looping. Auto Terminating.
2. Composite
Monitor-A
Output:
Composite video output with BNC style connector.
3. Y/C Monitor-A Output:
Y/C video output with 4-pin mini-DIN style connector.
4. Alarm
I/O:
For connecting alarm inputs, and alarm output relays.
5. RS485 Port 1 Connector:
For connecting to keyboard and other RS485 devices.
6. 10/100 Ethernet Port:
For connecting to remote PC via ethernet network.
7. Composite
Monitor-B
Output:
Composite video output with BNC style connector.
8. Y/C Monitor-B Output:
Y/C video output with 4-pin mini-DIN style connector.
9. SCSI
Port:
For connecting SCSI compatible archive devices.
10. RS232 Port 1:
For modem connection and external control of the unit.
11. RS485 Port 2 Connector:
For connecting to keyboard and other RS485 devices.
12. RS232 Port 2:
For Event Generation and ASCII Text insertion.
Camera Inputs
Cable:
75-Ohm Coaxial
Connectors:
BNC
Auto Terminating:
Yes
Passive Looping:
Yes
There are two BNC jacks for each camera. Either
jack can receive a camera signal. The signal is
looped (directly connected to the other jack), making
the camera signal available to other equipment.
The camera input connectors are Auto Terminating.
This means that the input signal will automatically be terminated with 75-Ohms unless a 2
nd
cable is
connected to the 2
nd
BNC connector of the same camera input. Make sure there is 75-Ohm
termination at the end of the video line if the signal is looped through the DVMR
e
Triplex.
Time base correction is performed during digital capture. As a result, cameras do not require
synchronization.
See section 3.14 for information about disabling unused camera jacks in the menu system.
Composite Monitor Output
When connecting directly from the DVMR
e
Triplex to
the monitor, select the 75-Ohm impedance setting on
the monitor.
Cable:
75-Ohm Coaxial
Connectors:
BNC
If an additional device is connected to the monitor’s looping output, set the termination of the additional
device as 75-Ohm, and set the termination of the monitor as Hi-Z (High Impedance).
Содержание Calibur DVMRe Triplex
Страница 74: ...0150 0193A...
