KALATEL Calibur DVMRe Triplex, Руководство пользователя

Страница: 8 / 74

0150-0193A 8 Calibur DVMR
e
Triplex
1.4 Unpacking
Check the package and contents for visible damage. If any components are damaged or missing, do
not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be
shipped in the original packing box.
Package Contents
•
The DVMR
e
Triplex unit.
•
The Alarm Interface Circuit Board (P/N 0090-0077B).
•
The User Manual (P/N 0150-0193A).
•
A WaveReader Software CD (P/N 0151-0005-25W11).
•
The WaveReader Software Manual (P/N 0150-0143I).
•
The Archiving Addendum (P/N 0150-0194A).
•
Power Supply (P/N 4310-0020)
•
Power Cord ( NTSC P/N 4310-0002) ( PAL P/N 4310-0001)
1.5 Installation Environment
Power: Ensure that the installation site’s AC power is stable and within the rated voltage of the 12
Volt DC power supply. If the site’s AC power is likely to have spikes or power dips, use power line
conditioning or an Uninterruptable Power Supply (UPS).
Ventilation: Ensure that the location planned for the installation of the unit is well ventilated. Take
note of the locations of the cooling vents in the unit’s enclosure, and ensure that they are not
obstructed.
Temperature: Consider the unit’s operating temperature (0 to 40 °C) and non-condensing humidity
specifications (10% to 80%) before choosing an installation location. Extremes of heat or cold beyond
the specified operating temperature limits may cause the unit to fail. Do not install the unit on top of
other hot equipment. Leave space between rack mounted units.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage the internal components.
Do not install the unit near sources of water.
Chassis: Other equipment may be placed on top of the unit if it weighs less than 35 pounds (16
kilograms).
1.6 Associated Equipment
Associated equipment in a typical security system could contain the following items:
•
Two monitors
•
A Keyboard (KB3 or KTD405).
•
Video cameras: Composite video, 1 volt peak-to-peak.
•
Alarm input devices: Pressure sensors, motion detectors, etc.
•
Alarm output devices: Buzzers, Sirens, Flashing Lights, etc.
•
A PC connected via ethernet cable.
•
An external archive device, such as a DVSe, RAID, CD-R, DAT, or AIT drive.
For instructions regarding the connection of the associated security equipment in your system, please
consult the instruction manual of the associated equipment.