KALATEL Calibur DSR-2000e, Руководство пользователя, Страница: 44 / 58

Calibur DSR 5-4 0150-0163f
5.5 Advanced Menu
→
Communications
Baud Rate
Ethernet
Use thus menu to specify:
•
The data transfer rate for the RS-232 serial port.
•
The units Ethernet network connection settings.
o
Advanced Menu
→
Communications
→
Baud Rate
Use the Jog to select the Baud Rate.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
1200 Baud
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
o
Advanced Menu
→
Communications
→
Ethernet
An Ethernet session is an active network connection between a PC and the unit, with the user viewing
live camera images or accessing data stored on the hard disk.
Message
When Ethernet is first selected,
this warning box will appear.
Select
OK
to continue.
Warning – Machine will reset if any values change!
[OK]
Ethernet Settings
Use this menu to adjust the Ethernet settings for
your network.
Use the Shuttle to navigate to the desired setting,
then use the Jog to adjust the value.
Consult with your local MIS personnel before
making Ethernet setting changes.
Ethernet : ENABLE
IP Address : 192.168. 1.201
Subnet Mask : 255.255.255. 0
Gateway : 0. 0. 0. 0
[CANCEL] [OK]
Select
OK
to confirm the selection and exit the menu.
--OR--
Select
CANCEL
to exit the menu without making changes.
How the unit handles an Ethernet session
At the start of an Ethernet session, the unit locks out its own front panel and disables all RS-232 and
RS-485 communications. During the Ethernet session, the unit can only be accessed remotely, using
the WaveReader software. When the Ethernet session ends, the unit re-enables the RS-232 and RS-
485 communications and unlocks the front panel.
Playback stops when an Ethernet session is started. Playback will not be re-activated automatically
when the Ethernet session ends.