4
III. Safety instructions
We hereby declare that, the damage caused by the following acts shall not be responsible for:
-Faulty installation or connection.
-Over voltage and mechanical damage cause.
-Transforming the refrigerator without permission.
-Failure to manual operation.
Pay attention to the voltage description on the rating label, and ensure that the power cord is connected
to right power outlet.
If this power cable is damaged, it must be replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
Disconnect the power supply when cleaning and maintenance or stop use.
NOTICE! Danger of damage!
Disconnect the refrigerator and other consumer units from the battery before you connect the battery to a
quick charging device.
Over-voltage can damage the electronics of the device.
Refrigerator can only be maintained by authorized person; improper maintenance may lead to
unexpected dangers or damages.
Corrosive materials cannot be stored.
The appliance should be placed at the dry place, and prevent it from water splashing, rain and moisture.
Do not immerse it into water.
Do not place the appliance near heat sources such as heaters or direct sunlight.
Make sure well-ventilated for heating yield.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision use of
the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.
IV. Preparing before use
1. Use a damp cloth to clean the refrigerator inside and outside when use it for the first time. Specifics
please refer to the
“Cleaning and maintenance”
.
2. Energy-saving tips
-Select a well-ventilated place and keep the refrigerator away from heat or direct sunlight.
-Cool the hot food before putting into the refrigerator.
-Reduce the times and lasting time to open the lid.
-Defrost in time when inner frost.
-Setting temperature properly and reduce unnecessary low temperature setting.
V. Operation and function
1. Connecting to power
