KAKADU BIRDSVILLE, Руководство пользователя

Страница: 4 / 12

4
™
MOUNTING YOUR LADDER
Turn the tent over so you have access to the
side without the mounting rails. Very carefully
remove the end plastic cap of the top channel
and slide the four M8 bolts with the oval shaped
heads in. Hold the ladder in position and place
the mounting brackets in the correct position.
Tighten the bolts and nuts on the bracket firmly
to secure.
Attach the ladder to the brackets with the quick
release pin system.
MOUNTING ROOF BARS
1. Very carefully remove the plastic end caps on
the metal bars fitted to the tent then carefully
slide in two M8 steel bolts on the inside track.
Place the roof bar bracket over the top of the
bolts then place the nut over the exposed part
of the bolts. Tighten one bolt up approximatively
3/4 tight in the area you want to mount the bars.
Repeat this on the other side of the tent.
2. Slide the rubber cap over the end of each roof
bar before installing onto brackets. Slide in four
5/8 inch M8 steel bolts into the underside of the
roof bars and loosely attach the nuts. Position
the bars sitting on top of the metal bracket and
tighten nuts up once they’re sitting underneath
the opening of the bracket fitted to the tent bars.
Repeat this on other side.
3. Tighten all eight nuts on both sides of the roof
bar. Repeat this for second roof bar.
TIP: Take notice of where the ladder will sit and
don’t mount roof bars in this area.
*LADDER NEEDS TO BE
REMOVED WHEN VEHICLE
IS IN TRANSIT.