KAKA Industrial W01-2422, Руководство по эксплуатации, Страница: 5 / 8

4. To remove the finished roll, pull out Sleeve (#10) on the end of Shaft 1
(#8), nearest the Handle (#23), and swing Shaft 1 out of the Right Stand.
Then remove the steel roll from Shaft 1.
Forming Rings
The half-round slots on the right side of Shaft 2 (#20) and Shaft 3 (#7) can be
used to form rings of various dimensions.
1. Insert the steel in half-round slot of Shaft 2 (#20) or Shaft 3 (#7).
2. Rotate the Handle (#23) to form the metal ring.
WARNING: Keep the hands away from the shafts and metal
plate during operation. Do not attempt to form rolls from
materials other than those specified.