Operation Manual RM-08
Model RM-08
— 2 —
9. Keep children out of workplace.
Make workshop childproof. Use
padlocks to prevent any unintentional
use of tools.
10.Assemble only according to these
instructions. Improper assembly can
create hazards.
11.When tools are not in use, store
them in a dry, secure place out of the
reach of children. Inspect the tools
prior to storage and before reuse.
12. Maintain product labels and
nameplates. These carry important
safety information.
WARNING
The warnings, cautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions or situations
that could occur. It must be understood
by the operator that common sense and
caution are factors which cannot be built
into this product, but must be used by the
operator.
KNOW HOW TO USE TOOL
1. Use right tool for job. Do not force
tool or attachment to do a job for
which it was not designed.
2. Keep hands out of path of dies and
clear from male and female dies.
3. The maximum capacity of this
machine is 22 gauge (0.030”) mild
steel or equivalent. Exceeding capacity
may be dangerous to operator and
damage may occur to machine.
4. Bolt machine to sturdy stand that
is bolted to floor to prevent sliding or
tipping of machine.
General Safety Information
CAUTION
Always follow proper operating procedures
as defined in this manual even if you are
familiar with use of this or similar tools.
Remember that being careless for even a
fraction of a second can result in severe
personal injury.
WARNING
For your own safety, read all of the
instructions and precautions before
operating tool.
SAFETY RULES
1. Wear proper apparel. Do not wear
loose clothing, gloves, neckties,
rings, bracelets or other jewelry which
may get caught in moving parts of
machine.
2. Wear protective hair covering to
contain long hair.
3. Wear safety shoes with non-slip
soles.
4. Wear safety glasses complying with
United States ANSI Z87.1.
Everyday glasses have only impact
resistant lenses. They are NOT safety
glasses.
5. Be alert and think clearly. Never
operate tools when tired, intoxicated
or when taking medications that
cause drowsiness.
6. Keep work area clean. Cluttered
work areas invite accidents.
7. Work area should be properly lit.
8. Keep visitors at a safe distance
from work area.