Operation Manual
PR-3
KAKA Industrial
®
- 3 -
Warning
The Planetary Ring Roller must be
securely mounted prior to using!
small tool or attachment to do the work
of a larger industrial tool, Don
’
t use a tool
for a purpose for which it was not
intended.
16.
Secure work.
Use clamps or a vise to
hold the work if possible. It
’
s safer than
using your hands and it frees both hands
to operate the tool.
Assembly
1. Slide the CONNECTOR (#4) onto the
DRIVE SHAFT II (#11). Make sure the
holes line up. See Figure 1.
2. Slide the HANDLE (#3) into the holes
of the CONNECTOR and DRIVE SHAFT
II.
3. Attach the CONNECTOR to the DRIVE
SHAFT II using the TAPER PIN (#7).
Figure 1
Mounting
1. Set the unit on the workbench at the
desired location.
2. Make sure that you can operate the
handle comfortably.
3. Mark the workbench through the two
holes in the BASE (#32) of the unit.
See Figure 2.
4. Remove the unit.
5. Drill holes through the workbench at
the marked locations.
6. Mount the unit using two bolts, lock
washers, washers, and nuts (in that
order), sold separately.
Figure 2
Operations
1. Determine the size ring you wish to
obtain.